Q: Is this clip “DOT Approved”?

Asked by: Kevin - 12/18/2020
A: This Quick release exceeds chin strap testing requirements for dot218 performance standards.
Was this answer helpful?  10 of 11 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (12/23/2020)
Submit an answer

Q: Will this fit with 1 inch wide strap?

Asked by: Rangga - 1/8/2021
A: Yes, this will fit a 1 inch wide strap.
Was this answer helpful?  6 of 6 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (1/9/2021)
Submit an answer

Q: Is this clip “DOT Approved”?

Asked by: Kevin - 12/18/2020
A: Didn't answer the question - a YES or a NO, for DOT approved?
Was this answer helpful?  2 of 7 Customer(s) found this Answer helpful.
Answer provided by: David J Pflanz (6/30/2023)
Submit an answer

Q: Hi I’m in the UK ,how much to ship Thanks

Asked by: Eamon - 3/19/2021
A: Shipping costs are calculated when you submit your order.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (3/19/2021)
Submit an answer

Q: have you got anymore helmet quick release coming in thanka

Asked by: glyn moxon - 3/31/2021
A: Back in stock.

Thank you!
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (4/17/2021)
Submit an answer

Q: Hello! Any idea when the helmet quick release will be back in stock? Thank you!

Asked by: Marco - 4/12/2021
A: Back in stock!

Thank you
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (4/17/2021)
Submit an answer

Q: Do you have the Helmet clip HC-100 in stock

Asked by: Bill Seaman - 5/12/2021
A: The Helmet Clip is back in stock!
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Bill Harbison (7/12/2021)
Submit an answer

Q: my helmet has double d ring fastening, is this compatible with my helmet?

Asked by: Charles Carlton - 5/14/2021
A: Yes, this clip will work with helmets with D-rings.

Thank you
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Bill Harbison (7/12/2021)
Submit an answer

Q: will these buckles fit on a 1 inch wide strap?

Asked by: Bud - 6/8/2021
A: Yes, we have tested 1 inch wide straps.

Thank you
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Bill Harbison (7/12/2021)
A: Yes, this will fit a 1 inch wide strap
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Bill Harbison (7/12/2021)
Submit an answer

Q: did you delivery to Italy? Best wishes Nic

Asked by: nic - 7/6/2021
A: Yes, we ship to Italy.
Was this answer helpful?  1 of 1 Customer(s) found this Answer helpful.
Answer provided by: Bill Harbison (7/12/2021)
Submit an answer

Q: Is this clip “DOT Approved”?

Asked by: Kevin - 12/18/2020
A: This Quick release exceeds chin strap testing requirements for dot218 performance standards.

Thank you,
The Helmet Shop.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (10/23/2023)
A: This Quick release exceeds chin strap testing requirements for dot218 performance standards.

Thank you,
The Helmet Shop.
Was this answer helpful?  0 of 1 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (7/19/2023)
Submit an answer

Q: Will this fit with 1 inch wide strap?

Asked by: Rangga - 1/8/2021
A: No, it will not fit a 1-inch strap width.

Thank you,
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (10/23/2023)
Submit an answer

Q: if i buy in large quantity is there any discount given?

Asked by: SALLEH NASER - 7/17/2021
A: Yes, please call us for a purchase quote.

Thank you
800-630-6434
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (7/28/2021)
Submit an answer

Q: So I wonder how you suggest removing the snap on the original strap. Not covered in the video and if done incorrectly you are looking for a new helmet. I love the product but you only get one chance to remove the snap. Thanks, Al

Asked by: Big Als - 10/20/2021
A: You may use needle nose pliers, they seem to work the best, just squeeze it a bit and it should pop off.

Thank you
The Helmet Shop
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (10/21/2021)
Submit an answer

Q: Has my order been shipped yet. I have no tracking number.

Asked by: Robert Breen - 12/21/2021
A: Hi Robert, sorry for the late response, yes we shipped all your quick release orders, we hope you like them and enjoy the ride.

Thank you
Paul
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (1/4/2022)
Submit an answer

Q: I have a Fulmer 152 helmet. The quick release has broken and I need to replace it. Will this work?

Asked by: JASON UPCHURCH - 5/3/2022
A: The Helmet Clip requires D-rings for it work.

Thank you
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (5/6/2022)
Submit an answer

Q: How do you installbthisnmotem

Asked by: Carlos Goodman - 5/22/2022
A: Please scan the QR code for a link to the installation video. This is a link to the installation video.

https://www.youtube.com/watch?v=irsGjzQ4RUQ
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (5/24/2022)
Submit an answer

Q: Do you have this item in stock the quick release for the helmet

Asked by: Cuse - 6/19/2022
A: Yes, it is in stock
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (6/22/2022)
A: Yes, we do have it in stock.

Thank you,
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (6/22/2022)
Submit an answer

Q: Is this adaptable to an existing helmet?

Asked by: Jeffrey O'Neill - 6/28/2022
A: Yes, this is designed to fit most helmets with D-Rings.

Thank you,
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (7/1/2022)
Submit an answer

Q: Is this compatible with a Shoei RF-1200?

Asked by: Stacy - 10/12/2022
A: Yes it should be ok with the 1200. Please follow the video instructions.

https://www.youtube.com/watch?v=irsGjzQ4RUQ&t=159s

Thank you,
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (10/27/2022)
Submit an answer

Q: I bought a quick release and was wondering the easiest way to remove the snap from the helmets strap?

Asked by: Dave - 1/31/2023
A: The best way is to use a flat head screwdriver to pry it open, it should snap off or plyers to apply pressure on each side of the snap and pull it off, the snap button is made of two parts.

Thank you,
Paul
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (2/9/2023)
Submit an answer

Q: We are a motorcycle shop in Minnesota . We're looking for a substitute for the Echo quick release helmet conversion kit. I see yours is out of stock. Will you be getting more and do you wholesale them to motorcycle dealers?

Asked by: Evan Rosen - 5/9/2023
A: Hello,

Thank you for your interest in our quick-release buckle, yes the clip is back in stock in low quantities, we are expecting more in one week. We can set up a whole sale account for you by calling.

Thank you,
Paul
The Helmet Shop.
800-630-6434
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (5/11/2023)
Submit an answer

Q: Hi, Where can I purchase this item in Europe? Thanks

Asked by: Rui Duarte - 6/13/2023
A: You may place the order on the website or place an order on Amazon.

Thank you,
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (6/20/2023)
Submit an answer

Q: How do you remove the button snap from the helmet's strap? Skipped that detail in the video, eh!

Asked by: David J Pflanz - 6/30/2023
A: The easy way is to use pliers or a flat-head screwdriver to pry it apart, the button consists of 2 parts one on each side of the strap, Break these two pieces apart from each other using a screwdriver and/or pliers. It will pop out.

Thank you,
Paul
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (7/6/2023)
Submit an answer

Q: Do I absolutely have to remove the existing plastic snap button from the long strap to install your helmet clip? Why, which part will the strap not pass through?

Asked by: Lewis - 7/17/2023
A: To pass the helmet strap thru the metal part you must remove the button, the button can be separated with a flat screwdriver, it consists of two parts that are snapped together on each side of the strap.

Thank you and let us know if you have any other questions we can help you with.

Have a nice day.
Paul
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (7/20/2023)
Submit an answer

Q: how do you install on a bell revolver, which has the magnetic on the d-ring?

Asked by: Thomas M. Smith - 7/23/2023
A: The snap button must come off in order to pass the strap thru the metal clip. The D-rings are used to install the ratchet part, please see this video for further installation details.

https://www.youtube.com/watch?v=irsGjzQ4RUQ

Thank you,
Paul
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (7/25/2023)
Submit an answer

Q: im in australia, how can i get my hands on one of these?

Asked by: ron - 9/12/2023
A: Hello,

Please place your order on the website.

Thank you,
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (9/14/2023)
Submit an answer

Q: How much does it effect the positioning length of the helmets strap ??? That is one of the MAJOR problems of other quick release products on the market ...

Asked by: Rick - 9/29/2023
A: it adds about 1 inch to the strap length.

Thank you,
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (10/2/2023)
Submit an answer

Q: Good morning, do you post to UK?. I cannot find your buckle anywhere over here. I’ve looked at many and think yours is the dogs, thanks Jane

Asked by: Jane Graham - 10/22/2023
A: Hello,

We do not post it to Australia but you may place an order on the website.

Thank you,
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (10/23/2023)
Submit an answer

Q: Your kit seems the best and was available on Amazon UK. Would you to UK ? If you would ! I would buy 3 to justify shipping costs.

Asked by: Paul - 10/22/2023
A: Hello,

Yes, we ship to the UK, please submit your order today!

Thank you,
The Helmet Shop.

Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (10/23/2023)
Submit an answer

Q: Would you post quick release buckle to the UK, thanks Jane

Asked by: Jane Graham - 10/23/2023
A: Hello,

Thank you for reaching out to us. Yes, we do ship to the UK. Please submit your order.

Thank you,
Paul
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (10/25/2023)
Submit an answer

Q: Sorry that I am a bit,baffled on how to attach the quick release…I need a little guidance…thanks a million…Bigtex

Asked by: Bigtex - 11/22/2023
A: Hello,

Thank you for your recent order. We have a comprehensive installation video online, please scan the QR code on the helmet clip topper.

Thank you,
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (11/22/2023)
Submit an answer

Q: I purchased this item, but there's no instructions for installation, there's a video code you can scan but I don't have a smart phone which makes this useless to me.

Asked by: James - 12/23/2023
A: Hello,

Thank you for your purchase of our helmet clip. Please visit www.helmetclip.com for a video on how to install it.

Thank you,
Paul
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (12/26/2023)
Submit an answer

Q: will this fit a half inch chin strap?

Asked by: Robin Langley - 12/28/2023
A: The chin strap can be up to 7/8" of an inch wide to pass thru the metal ratchet.

Thank you,
Paul
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (12/29/2023)
Submit an answer

Q: I have one of the quick release helmet buckle strap kits. I bought it months ago. I've misplaced the packaging with the QR code and website on it. Please provide me with a link to the install video. Thanks in advance Chris [email protected]

Asked by: Chris - 1/7/2024
A: Thank you for reaching out to us concerning the helmet clip installation video. Here's a link for you.

Thank you,
Paul

https://helmetclip.com/helmet-clip-install-video
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (1/8/2024)
Submit an answer

Q: hi, can i get the helmet clip shipped to the uk? many thanks Glynn S terry

Asked by: Glynn Sterry - 2/7/2024
A: Hello Glynn S Terry,

Yes, we do ship to the UK, you may place your order for the helmet clip at any time.

Thank you,
Paul
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (2/8/2024)
Submit an answer

Q: What is the maximum strap width this will accommodate?

Asked by: Norm - 2/24/2024
A: Upto 7/8 of an inch, so most helmet straps.

Thank you,
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (2/26/2024)
Submit an answer

Q: I purchased this clip for my 11 year olds closed face helmet that he wears. First, your installation video was spot on. My issue is when I install this, even with every inch of slack possibly taken out of the strap, it still extends it too much for it to even come close to securing the helmet on my son. Prior to installation the strap was almost pulled completely tight and after the installation there was way too much slack that couldn't be compensated for to tighten the helmet. Do you have another product that might work in this situation? Or any recommendations? I snapped the button off so now the strap will just flap when he wears it. Please help!

Asked by: Lauren Soles - 3/18/2024
A: Thank you for purchasing our helmet quick-release buckle. Unfortunately, there is no other option, it does not work for children or adults with small heads, and there is no modification recommended or any other product made to shorten the strap.

Thank you,
Paul
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (3/19/2024)
Submit an answer

Q: Why doesn’t the QR on your package work?

Asked by: Michael Bundy - 4/17/2024
A: Hello,

Thank you for reaching out to us. I tried it on one here and it works. You can also go to helmetclip.com and watch the installation video but you don't have to remove the strap snap on this new clip you got.

Thank you,
Paul
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (4/17/2024)
Submit an answer

Q: Hello, I'm finding that there is not enough room to clamp the strap into the D-ring. So the only way it fits is to not "thread it through", but just wrap it around the D-ring and snap without the compression. Thoughts on this?

Asked by: Tony Lopes - 6/28/2024
A: Please DO NOT just loop the quick-release strap on the Drings, that is not safe at all!

Please watch the provided video.

https://www.youtube.com/watch?v=irsGjzQ4RUQ

Thank you,
Paul
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (7/3/2024)
Submit an answer

Q: Hi i recently received my order for my helmet quick release clip. I love the clip, it seems like a fantastic product. When I installed it on my helmet (Sedici Strada 2) the strap became too long. With the helmet clip on I have been unable to find a strap configuration that is short enough to adequately keep the strap below my chin. Are there any installation tips that might solve this problem? I'd love to keep and use the clip but unless I can somehow shorten the strap it doesn't seem like it will work for my application. Thanks in advance! Erik

Asked by: Erik Bush - 8/2/2024
A: Hello,

Thank you for your quick-release purchase, make sure the strap is pulled to the back end of it, some helmets allow you to keep shortening the strap past the cheek pad. There is no other way to shorten it further.

Thank you,
Paul.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (8/7/2024)
Submit an answer

Q: where is the video to install on my helmet

Asked by: john hill - 1/25/2025
A:
We are in the process of creating a new installation video, which will be released soon. In the meantime, you can scan the QR code on the product packaging for guidance. Here's a link to our previous video, but please note: if your helmet has a strap button, there's no need to remove it.

https://www.youtube.com/watch?v=irsGjzQ4RUQ&t=208s

Thank you,
Paul.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (1/28/2025)
Submit an answer

Q: where is the video

Asked by: john hill - 1/25/2025
A: Here's a link to the installation video. Please note that the new version has been redesigned, so there’s no need to remove the strap button.

https://www.youtube.com/watch?v=irsGjzQ4RUQ&t=208s

Thank you,
Paul.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (1/28/2025)
Submit an answer

Q: does this work with 1" wide strap?

Asked by: David Deily - 1/25/2025
A: It will not work for 1" straps.

Thank you,
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (1/28/2025)
Submit an answer

Q: Will this quick release work on a full face helmet?

Asked by: Mark Price - 1/28/2025
A: It will install on any helmet with straps, including full face.

Thank you,
The Helmet Shop.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (1/29/2025)
Submit an answer

Q: i need the video

Asked by: george jones - 2/13/2025
A: You can just follow this video, except it is not necessary to remove the button off the helmet strap. [DO NOT REMOVE STRAP BUTTON]

Thank you,
Paul.


https://www.youtube.com/watch?v=irsGjzQ4RUQ
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (2/14/2025)
Submit an answer

Q: What size helmet strap does this quick release fit?. Thanks

Asked by: Mike Sassone - 2/17/2025
A: The quick release can accommodate a helmet strap up to 1/15 inch wide.

Thank you,
Paul.
Was this answer helpful?  0 of 0 Customer(s) found this Answer helpful.
Answer provided by: Paul Coppelli (2/18/2025)
Submit an answer