The RAM-B-174-UN4U consists of a hardware for mounting to both brake/clutch reservoirs and rails that are 0.5" to 1.25" in diameter, double socket arm, diamond adapter base and high strength universal Finger Grip? cradle. The mounting hardware for brake/clutch reservoirs include both standard and metric mounting bolts. The base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
Height Dimensions:Minimum with Top and Bottom Plates: 5.25"Maximum with Top and Bottom Plates: 6.0"The top and bottom plates can be removed for larger devices. Spine Plate Dimensions: 2.5W x 5.0H" Using Short Arm Side Clamps:Maximum Depth: 0.75"Minimum Width: 1.25"Maximum Width: 3.0" Using Medium Arm Side Clamps:Maximum Depth: 1.25"Minimum Width: 1.5"Maximum Width: 3.5" Using Long Arm Side Clamps:Maximum Depth: 1.6"Minimum Width: 2.25"Maximum Width: 3.5" Included with Purchase:(1 qty) Universal Finger Grip? cradle(1 qty) Base/ball adaptor (attaches directly to cradle)(1 qty) Standard size double socket arm(1 qty) Mounting base (mounts to either brake/clutch reservoir or rail/handlebar)Hardware for mounting to either brake/clutch reservoir or rail/handlebar Material:High Strength Composite & Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note:The "U" in the part number reflects product packaged in poly bag. This product can mount to both the brake/clutch reservoir or any round rail that is 0.5" to 1.25" in diameter. To see if the base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58". Weight:0.51 lbs.